Acoustiblok Press Release Content

Liz Ernst

Recent Posts

Acoustiblok Donates Wallcover Noise Abatement Material to Children’s Home

Posted by Liz Ernst on Tue, Nov 13, 2012 @ 12:55 AM

Acoustiblok Wallcover InstallationBellewood cottagesBellewood kids

Left: Volunteer cuts Acoustiblok Wallcover to size; Center, Bellewood residential cottages are home to abused and neglected children from across Kentucky; Right: Children from birth to age 21 have had a second chance at better lives through Bellewood.)

TAMPA, Florida, November 5, 2012, 2012 – Tampa-based Acoustiblok, Inc. has donated its noise reducing Acoustiblok Wallcover® material to the Bellewood Home for Children in Anchorage Kentucky, to block noise from the campus’s multi-machine laundry room from passing through a common wall and into the facility’s therapy room. Installation of the Acoustiblok Wallcover effectively reduced noise in the therapy room by 10 decibels, which translates to a perceived volume reduction of 50 percent.

The donated Acoustiblok Wallcover was installed last week as part of a large-scale project to restore and improve the facility’s five residential cottages, recreational areas and common buildings, and to improve safety and enhance Bellewood Home’s village setting.

For 163 years, Bellewood Home has provided a safe haven for thousands of abused, neglected and homeless children from across Kentucky.

Lahnie Johnson, President and Founder of Acoustiblok, Inc., says he is proud that the company was able to contribute the noise blocking qualities of Acoustiblok Wallcover to the ambitious renovation project at Bellewood.

“When you have noise from commercial machines such as those in the facility’s laundry room passing through a common wall into the therapy room, it can be detrimental to the children’s therapeutic or remedial treatments,” Johnson says. “Noise is known to cause a myriad of problems in therapeutic settings, including stress, inability to focus, and other problems.

“This is a wonderful use of Acoustiblok Wallcover, and the community volunteers on the Bellewood renovation project were able to use it because it could be installed directly over the existing drywall, so no demolition or costly construction process was required.”

For more information on Acoustiblok Wallcover or any of Acoustiblok’s noise abatement products, visit the Acoustiblok website, Email sales@acoustiblok.com, or call 813-965-4373. 

About Acoustiblok:

Acoustiblok, Inc., a NASA spin-off company, has been providing high quality noise abatement products since 1998, earning the industry’s highest ratings from architects, builders, and consumers. Acoustiblok is a proprietary viscoelastic polymer material with a high density mineral content, heavy and yet extremely flexible. As sound waves cause the Acoustiblok material to flex, internal friction occurs and the acoustical energy is transformed into inaudible trace amounts of heat (adiabatic).

Just one, 1/8-inch layer of Acoustiblok in a standard wall can result in more sound reduction than 12-inches of poured concrete. Environmentally friendly, Acoustiblok contains no lead, barium, or asbestos, is UV resistant and impervious to water and mold; it is UL rated and classified in the US and Canada (CUL) for virtually all wall, floor, and ceiling installations.

###

PRESS RELEASE

Download PDF

For Immediate Release
Contact: Thomas Wiseman, Director of Public Relations
twiseman@acoustiblok.com
813.980.1400 x 210

Tags: noise blocking, charities, soundproofing, Noise pollution, noise abatement, noise barrier, noise insulating material, noise, Wallcover, walls and ceilings

All Weather Sound Panels® Resolve Generator Noise at LDS Temple

Posted by Liz Ernst on Wed, Oct 31, 2012 @ 11:55 AM

AWS Panels at LDS Temple AWS Panels LDS Temple LDSPanels7

VANCOUVER, BC, October 22, 2012 – Raicor Contracting, Ltd. earned the Northwest Wall & Ceiling Bureau’s Outstanding Project of the Year 2012 award for the visually spectacular LDS Temple located about 50 miles southeast of Vancouver in Langley, BC.  Included in the project’s flawless design are Acoustiblok’s All Weather Sound Panels, custom fit to create a clean, architecturally attractive noise barrier for the Temple’s roofless ancillary building that houses an industrial generator and HVAC systems.

Project Manager Timo Orava of Raicor worked with acoustic specialist Steve Hibbens, who recommended the All Weather Sound Panels for the project. Not only did the Temple officials want the noise reduced for Church members to worship in peace and quiet, the solution had to offer a clean, architecturally attractive appearance in keeping with the meticulously designed interior.

The LDS Temple which was built in the spirit of Solomon’s Temple of the Old Testament, according to Orava. Extreme care was taken not only in the design, but in the execution, which took more than three years to complete.

“The LDS Temple is an inspiring monument that Church leaders wanted built to perfection, right down to the very last detail,” Orava says. “It’s a visually stunning structure built to last, ideally, for hundreds of years.

“Church leaders’ interest was in getting a completed structure that is pleasing to God’s eye, and nothing less would suffice.”

The project was challenging for Orava’s team at Raicor because of the extremely high building standards in place, and the Temple leaders’ meticulous requirements. With a zero-tolerance for deficiencies, from the drywall to the wall sconces, the project demanded faultless workmanship. Orava said the Acoustiblok All Weather Sound Panels were no exception, and needed to fit exacting specifications in the structure.

“One-eighth of an inch off anywhere, and they would not have fit,” he said. “But the Acoustiblok team custom cut and finished each panel to the exact dimensions, and they all fit together flawlessly.”

Nineteen standard 4 foot x 8 foot panels and 13 custom sized panels were used to create the precision noise barrier that Temple leaders wanted; clean, aesthetically pleasing, and most important, effective.

“After the panels went in, the noise issue was resolved, which was surprising because the building that houses this noisy industrial equipment has no roof,” Orava says. “The noise is no longer a problem.”

Acoustiblok President and Founder Lahnie Johnson says the All Weather Sound Panels  are different from other conventional sound panels. In addition to being able to stand up to the most extreme environments, they not only absorb virtually all sound but they also contain a layer of Acoustiblok material which provides exceptional noise blockage.

The sound absorbency of the panel brings down substantially the acoustical energy around the generator and chiller by eliminating all sound reflections in the area, while the Acoustiblok material in the panel allows it to also be an excellent sound barrier. These qualities make the All Weather Sound Panels a perfect fit for the LDS Temple, where they will perform at their full potential in the Northwest Canadian environment.

“Vancouver experiences some real weather extremes, which these panels are built for,” Johnson says.

“In addition, when they are worked into an architectural design with this kind of precision and attention to detail, they offer an enhanced aesthetic when appearance is important, as it was here.”

For more information visit the Acoustiblok website (www.acoustiblok.com), Email (sales@acoustiblok.com), or call 813.980.1400.

About Acoustiblok All Weather Sound Panels®:

Acoustiblok, a NASA “Spin-off” company, developed the All Weather Sound Panels, engineered specifically to withstand the most rigorous outdoor and industrial environments. Water, moisture, humid salt air or salt water, dirt, dust, UV, chlorine air, corrosion, and most harsh chemicals do not affect them. The industrial sound panels are available with an acoustically transparent five micron stainless steel dust filter for outdoor use in the world’s toughest environments, from the mining industry to the desert areas of the Middle East, and other applications where dust is a concern. Acoustiblok sound panels are extremely durable and are currently in use by the United States Army in the Middle East.

Washable, durable, long lasting and usable in hundreds of areas and applications, the Acoustiblok All Weather Sound Panels are not just "sound absorbing" but also "sound blocking." This allows the panel to not only absorb sound but also stop the sound from penetrating through the panel, a very meaningful advantage over conventional "sound absorbing" panels that stop sound reflections but are poor sound barriers.  

With an unprecedented noise reduction coefficient (NRC) of 1.00 (Riverbank Acoustical Laboratories test results), they are the only noise barrier wind-load tested to 270 mph. Rigid and self-supporting, they can be used like building blocks to permanently or temporarily enclose any noise source, such as chillers and industrial machinery.

###

PRESS RELEASE

Download PDF

For Immediate Relase
Thomas Wiseman, Director of Public Relations
twiseman@acoustiblok.com
813.980.1400 Ext. 2109

Tags: All Weather Sound Panels, outdoor soundproofing, outdoor noise, soundproofing, industrial noise, Noise pollution, noise abatement, noise insulating material, generator noise, HVAC noise, industrial noise pollution, sound panels

High Velocity Blower Noise in Pharmaceutical Lab Resolved

Posted by Liz Ernst on Thu, Oct 11, 2012 @ 10:15 PM

Santo DOmingo Pharamceutical Lab NoiseSanto Domingo Pharmaceutical Lab blowerSanto Domingo Pharmaceutical noise enclosure

SANTO DOMINGO, Dominican Republic, October 11, 2012 – Acoustiblok, Inc., announced today that the recent installation of Acoustiblok noise blocking material and QuietFiber sound absorbing material at the Ethical Labs production plant in Santo Domingo has provided enough noise abatement to lower noise levels in a louvered structure housing industrial high velocity blowers by 71 percent.

The Acoustiblok and QuietFiber installation, conducted by Carlos Montas, the Dominican Republic representative for Acoustiblok, Inc., lowered decibel levels from 80dB to 62dB, even with a portion of the louvers remaining open.

Montas, owner of Edelca – the industrial power engineering company that prepared the electrical system of the entire pharmaceutical production plant – says the project required layering Acoustiblok 3mm soundproofing material in the structure first, followed by a layer of QuietFiber sound absorbing material on top of the Acoustiblok, on both the interior walls and door of the metal structure.

Representatives of Ethical Labs said they were thrilled with the results, which took the unbearably loud blower noise down to a decibel level that was no longer a distraction to anyone.

“We are totally impressed with how well the products worked,” says Carlos Mendez of Ethical Labs. “When the project was half way done we could already hear a difference, it’s amazing.”

Montas, who designs and installs industrial emergency generators throughout the Caribbean’s coastal regions, installs QuietFiber in all of his projects to deaden industrial noise.  Both the Acoustiblok and Quiet Fiber materials are easily cut to fit around electric conduits, and secured to the walls and ceiling with standard insulation stick pins.

The sound deadening qualities of the layered Acoustiblok and QuietFiber materials will help to protect the pharmaceutical plant’s employees and visitors from the high volume industrial noise contained within the enclosure.

Lahnie Johnson, president and founder of Acoustiblok, Inc., says that the application of Acoustiblok and QuietFiber in the louvered structure housing the blowers was the best possible solution for addressing the high decibel, reverberant sound emanating from within.

“Both Acoustiblok and QuietFiber are designed to withstand this type of hot, humid environment,” Johnson said. “When you’re addressing this type of industrial noise within a louvered structure, you need a layer of noise blocking material, which the Acoustiblok material provides, and a layer of noise absorbing material, which QuietFiber provides.

"Combined, you have proven maximum noise abatement, high temperature rating for fire blocking, and hydrophobic (resistant to moisture) qualities that make the solution a success.”

For more information visit the Acoustiblok website (www.acoustiblok.com), Email (sales@acoustiblok.com), or call 813.980.1400.

About Acoustiblok:

Acoustiblok, Inc., a NASA spin-off company, has been providing high quality noise abatement products since 1998, earning the industry’s highest ratings from architects, builders, and consumers. Acoustiblok is a proprietary viscoelastic polymer material with a high density mineral content, heavy and yet extremely flexible. As sound waves cause the Acoustiblok material to flex, internal friction occurs and the acoustical energy is transformed into inaudible trace amounts of heat (adiabatic).

Just one, 1/8-inch layer of Acoustiblok in a standard wall can result in more sound reduction than 12-inches of poured concrete. Environmentally friendly, Acoustiblok contains no lead, barium, or asbestos, is UV resistant and impervious to water and mold; it is UL rated and classified in the US and Canada (CUL) for virtually all wall, floor, and ceiling installations.

About QuietFiber:

High sound absorbency QuietFiber is a two-inch thick interior/exterior noise solution that can also be cut to fit and simply hot glued underneath a bar, cabinets, countertops, tables, chairs, behind a wall tapestry or curtains. Slide a QuietFiber “pillow” on top of cabinets, or anywhere else that reverberant noise and echo is a problem.  Easily cut to size with a serrated knife, QuietFiber can be concealed almost anywhere.

Used industrially for reducing noise, QuietFiber is a material designed to absorb the maximum amount of sound (NRC 1.00). Fireproof, totally hydrophobic (will not absorb water or moisture), washable, non-deteriorating, mold and mildew-proof.

QuietFiber® is used extensively for industrial noise reduction in large diesel generator rooms. It is also the answer to any space in need of a quick noise fix. QuietFiber is easy to install anywhere noise is a problem, without spending thousands of dollars to retrofit sound abatement material under drywall, or cover walls with expensive sound panels.

QuietFiber is UL fire rated for floor, wall and ceiling applications, 100 percent recyclable and 100-percent made in the USA.

###

PRESS RELEASE

Download PDF

For Immediate Relase
Contact: Liz Ernst, Director of Public Relations
Lizernst@acoustiblok.com
813.980.1400

Tags: sound barrier, Noise pollution, sound proofing, noise insulating material, HVAC noise, roadway traffic noise, sleep deprivation

Acoustiblok Names Carlos Montas Dominican Republic Manufacturing Rep

Posted by Liz Ernst on Tue, Oct 2, 2012 @ 08:44 AM

Carlos Montas

TAMPA, Florida, September 27, 2012 – Acoustiblok, Inc. Founder and President Lahnie Johnson this week approved a working agreement with Carlos Montas as Acoustiblok’s manufacturing representative in the Dominican Republic. Montas, Engineering Manager of Electicidad del Caribe SRL (EDELCA) in Santo Domingo, will represent Acoustiblok sound abatement products throughout the Dominican Republic.

Montas, a native of the Dominican Republic, is a 2005 graduate of Instituto Tecnológico de Santo Domingo (INTEC). He has built a career in the design, installation, and supervision of emergency generator systems in the industrial and commercial communities throughout the Caribbean.  He was first introduced to Acoustiblok products after installing QuietFiber noise absorbing material in one of EDELCA’s massive generator system projects to dramatically lessen the impact of the high decibel generator noise outside the generator facility.

With years of experience designing and installing his trademark generator systems, Montas understands the importance of installing noise absorbing material in every generator room and outbuilding he designs, since the noise can be intolerable and pose a real problem for businesses, residents, and visitors.

“Noise levels from the generators are almost unbearable, so you need to have some layer of soundproofing in place when they are running,” Montas said. “When we first installed QuietFiber in a generator room, I knew right away it was the best soundproofing product I had ever used, and I’ve used no other sound absorbing material since.”

EDELCA is a leader in the installation of emergency generation systems in the Dominican Republic and throughout the Caribbean, where tropical storms and weather events are a source of frequent power outages, making emergency generators a necessity for businesses to function smoothly.  As an authorized dealer of QuietFiber and other Acoustiblok noise deadening products, Montas offers first-hand experience and a seasoned understanding of how to solve noise issues from a variety of sources, including one of the toughest – industrial generators.

“Carlos Montas is a highly knowledgeable and sought after emergency systems engineer in a high-demand environment,” Johnson says. “I am convinced that we could have no better representative for Acoustiblok products in the Caribbean, given his extensive experience and comprehensive understanding of the region’s distinct noise abatement needs.

“His expertise and his work in the Dominican Republic and throughout the Caribbean make the alliance particularly satisfying, a perfect fit with Acoustiblok’s expansion into the Dominican Republic.”

For more information on Acoustiblok products, visit the Acoustiblok website, Email emontas@edelca.com.do , or call 809-596-8290.

About Acoustiblok:

Acoustiblok, Inc., a NASA spin-off company, has been providing high quality noise abatement products since 1998, earning the industry’s highest ratings from architects, builders, and consumers. Acoustiblok is a proprietary viscoelastic polymer material with a high density mineral content, heavy and yet extremely flexible. As sound waves cause the Acoustiblok material to flex, internal friction occurs and the acoustical energy is transformed into inaudible trace amounts of heat (adiabatic).

Just one, 1/8-inch layer of Acoustiblok in a standard wall can result in more sound reduction than 12-inches of poured concrete. Environmentally friendly, Acoustiblok contains no lead, barium, or asbestos, is UV resistant and impervious to water and mold; it is UL rated and classified in the US and Canada (CUL) for virtually all wall, floor, and ceiling installations. For more information, visit the Acoustiblok website, Email sales@acoustiblok.com, or call 813-980-1400.

###

PRESS RELEASE

Download PDF

For Immediate Relase
Contact: Liz Ernst, Director of Public Relations
Lizernst@acoustiblok.com
813.980.1400

Tags: soundproofing, industrial noise, Noise pollution, noise abatement, sound abatement, noise barrier, generator noise, HVAC noise, industrial noise pollution

Acoustiblok Names Alan Peterson New England Manufacturing Rep

Posted by Liz Ernst on Wed, Sep 26, 2012 @ 04:30 PM

Alan Peterson

TAMPA, Florida, September 20, 2012 – Acoustiblok, Inc. Founder and President Lahnie Johnson this week approved a working agreement with Alan Peterson as Acoustiblok’s manufacturing representative for Acoustiblok in New England. Peterson, owner of A.E. Peterson & Associates in Bedford, New Hampshire, will represent Acoustiblok sound abatement products in Maine, New Hampshire, Vermont, Massachusetts, Connecticut and Rhode Island.

Peterson, a native of Boston, attended Northeastern University before establishing himself in commercial aluminum window & doors sales, specializing in acoustical, hurricane, and historical windows. He founded A.E. Peterson & Associates in 1982, working with architects in New England, California, Texas, Florida and Georgia on finding solutions to noise problems in and around airports, trains, highways and other industrial settings where noise levels can reach 110 decibels. Peterson’s company also focuses on treating buildings in coastal areas where hurricane conditions exist, as well as some of the country’s oldest industrial buildings, with highly specialized historical aluminum windows.

Acoustiblok is a natural extension of Peterson’s product offerings, designed to fight noise pollution in some of the most extreme settings. Acoustiblok provides sound abatement materials for indoor and outdoor use to address noise issues in industrial, commercial and residential applications. 

“Alan Peterson is a respected and sought after acoustical door and window expert in a highly specialized niche,” Johnson says. “His expertise and his work with architects in New England and nationwide fits perfectly with Acoustiblok’s ongoing expansion throughout the U.S.

“Few people have spent the past 30-plus years participating in and developing serious noise abatement products; Mr. Peterson is a pioneer, and he exemplifies the high caliber sales professionals who contribute to Acoustiblok’s exponential growth.” 

For more information on Acoustiblok products, visit the Acoustiblok website, Email Alan Peterson, or call Alan Peterson at 603-472-8454.

About Acoustiblok:

Acoustiblok, Inc., a NASA spin-off company, has been providing high quality noise abatement products since 1998, earning the industry’s highest ratings from architects, builders, and consumers. Acoustiblok is a proprietary viscoelastic polymer material with a high density mineral content, heavy and yet extremely flexible. As sound waves cause the Acoustiblok material to flex, internal friction occurs and the acoustical energy is transformed into inaudible trace amounts of heat (adiabatic).

Just one, 1/8-inch layer of Acoustiblok in a standard wall can result in more sound reduction than 12-inches of poured concrete. Environmentally friendly, Acoustiblok contains no lead, barium, or asbestos, is UV resistant and impervious to water and mold; it is UL rated and classified in the US and Canada (CUL) for virtually all wall, floor, and ceiling installations. For more information, visit www.acoustiblok.com, Email sales@acoustiblok.com, or call 813-980-1400.

###

PRESS RELEASE

Download PDF

For Immediate Relase
Contact: Liz Ernst, Director of Public Relations
Lizernst@acoustiblok.com
813.980.1400

Tags: soundproofing, Noise pollution, noise abatement, sound abatement, noise barrier, noise insulating material

Jim Ashley Named Acoustiblok National Sales Manager, AV Division

Posted by Liz Ernst on Fri, Aug 10, 2012 @ 02:10 AM

Jim Ashley Acoustiblok national sales manager, AV divisionTAMPA, Florida, August 7, 2012 – Acoustiblok, Inc. Founder and President Lahnie Johnson has named Jim Ashley national sales manager of Acoustiblok’s AV division.  Ashley brings more than 27 years of experience in specialty electronics to the Acoustiblok sales team, where he will lead the department’s focus on channel integration.

Prior to joining the Acoustiblok team, Ashley, spent one year as VP of sales and marketing for SoundWave Technologies in New Smyrna Beach, where he streamlined processes while implementing new profit opportunities that had been previously overlooked. 

From 2002 through 2010, Ashley worked for Absolute Sound in Winter Park, starting in sales and working his way up to general manager. Ashley’s daily operations included sales, merchandising, marketing, and implementing new company policies and procedures. Within a few months of taking the helm as general manager, Ashley steered the company to its highest sales volume in history.

Ashley began his career in the electronics industry right out of high school. His background in drafting and architectural design, combined with his understanding of the complex process of integrating electronics and technology make Ashley a natural fit for Acoustiblok’s expanding sales team.

Ashley’s command of the specialty AV industry has made him a frequently quoted expert among journalists and specialty writers for a myriad of industry trade publications.

“We’re thrilled to have Jim on board, he brings a new dimension to the Acoustiblok sales team with qualities and skills we’ve been looking for in the national sales manager position,” Johnson says. “He has surpassed sales goals with every company he’s worked with, he has a broad knowledge of the specialty AV industry, and his track record could not be better.” For more information, visit the Acoustiblok website, email jashley@acoustiblok.com, or call 813.980.1400.

About Acoustiblok:  

Acoustiblok, Inc., a NASA spin-off company, has been providing high quality noise abatement products since 1998, earning the industry’s highest ratings from architects, builders, and consumers. Acoustiblok is a proprietary viscoelastic polymer material with a high density mineral content, heavy and yet extremely flexible. As sound waves cause the Acoustiblok material to flex, internal friction occurs and the acoustical energy is transformed into inaudible trace amounts of heat (adiabatic).

Just one, 1/8-inch layer of Acoustiblok in a standard wall can result in more sound reduction than 12-inches of poured concrete. Environmentally friendly, Acoustiblok contains no lead, barium, or asbestos, is UV resistant and impervious to water and mold; it is UL rated and classified in the US and Canada (CUL) for virtually all wall, floor, and ceiling installations. For more information, visit www.acoustiblok.com.

###

PRESS RELEASE

Download PDF
For Immediate Relase
Contact: Liz Ernst, Director of Public Relations
Lizernst@acoustiblok.com
813.980.1400 x 210

Tags: home office, home theater, noise management, acoustic insulation, acoustic boards, absorbing sound, acoustical balance, home theater noise

Distribution Facility Noise Resolved with Acoustifence Noise Barrier

Posted by Liz Ernst on Wed, May 30, 2012 @ 03:47 PM

acoustifence noise barrier 18 foot wall pilgrims pride distribution pr 2012 1acoustifence noise barrier 18 foot wall pilgrims pride distribution pr 2012 2

AIBONITO, Puerto Rico, May 23, 2012 – Installation of an 18-foot noise barrier utilizing Acoustifence sound blocking material has resolved a noise problem caused by truck traffic to and from the To-Ricos, Ltd. chicken processing and distribution facility in Albonito, Puerto Rico.

A common problem at industrial plants across the U.S. and Puerto Rico, trucks at the To-Ricos facility arrive day and night to be loaded and unloaded, and are often left idling for hours. The loud noise created by the trucks bled into the neighboring residential community, and unable to escape it whether they were indoors or outdoors, neighbors began to complain. Exposure to continuous industrial noise can cause sleeplessness, elevated blood pressure, depression and other health problems.

To-Ricos officials took action by contacting Tampa, Florida-based Acoustiblok, Inc., a manufacturer of residential and industrial noise abatement solutions. Acoustiblok consultants recommended the 18-foot Acoustifence barrier to block the truck noise from escaping into the neighboring community without interfering with the trucks’ ability to perform their functions and keep the plant operational.

Acoustifence is a thin outdoor noise blocking material which acoustically performs precisely as lead does, but without the environmental hazard of lead. It is now widely used in industrial environments, highways, construction sites, mass transit rail lines and in many other outdoor applications where noise is a problem.

Plant personnel constructed an 18 foot metal frame to support the Acoustifence sections, which was easily attached thanks to anodized brass eyelets installed along the top and bottom edge of each section, using heavy duty nylon ties included with the product.

“Acoustifence is becoming more popular for industrial applications like this one, where truck and traffic noise is bleeding into the surrounding communities and literally disrupting people’s lives,” said Lahnie Johnson, founder and president of Acoustiblok, Inc.

“To-Ricos has proven itself to be a good neighbor by addressing the noise problem as soon as they became aware of it, allowing us to help them design and fulfill a noise barrier solution that works and can last for years in their tropical island environment.”

 

To-Ricos is a division of the Pilgrim’s Corporation, the world’s second largest chicken producer headquartered in Greeley, Colorado.

About Acoustifence:  

Acoustiblok, Inc., a NASA spin-off company, has been providing high quality noise abatement products since 1998, earning the industry’s highest ratings from architects, builders, consumers, and even the British House of Commons. Acoustifence is a 1/8-inch (3mm) thick unique sound deadening material measuring 6 feet (1.82 meters) high by 30-feet (9.14 meters) long with black anodized brass eyelets along the top and bottom edge for easy attachment to any existing fence or structure.

Heavy-duty nylon ties are included with each roll. Easily installed or removed in less than one hour, impervious to mold, mildew, and UV, Acoustifence is virtually indestructible. The soundproofing material in Acoustifence is a proprietary formula of the Acoustiblok Corporation, developed and refined over a 10-year period.

Acoustifence has proven performance and is easily suspended from a chain link fence, eliminating the need for expensive permitting or structural requirements. Any height can be obtained by simply overlapping the sections. To store, Acoustifence sections simply roll up like carpet into less than a 12-inch diameter. Independent lab tests of the U.S.-made Acoustifence material show a sound transmission classification (STC) of 28, which represents to the human ear an approximately 85-percent sound reduction. However, results will be less, relative to surrounding sound reflective objects such as buildings or trees and the amount of Acoustifence installed.

Acoustiblok, Inc. also has available high quality landscape attachments which fit directly over the Acoustifence to provide a realistic landscape appearance. A variety of landscape attachments are available to choose from, including floral gardens, green meadows, English garden walls, and other scenic illustrations to blend into any natural backdrop or enhance an unfinished yard or property.

For more information on Acoustifence, visit the Acoustiblok website, call 813-980-1400, or E-mail sales@acoustiblok.com.

###

PRESS RELEASE

Download PDF
For Immediate Relase
Contact: Liz Ernst, Director of Public Relations
Lizernst@acoustiblok.com
813.980.1400 x 210

Tags: Acoustifence, acoustical fence, noise barrier fence, blocking unwanted outside sounds, outdoor noise, industrial noise, noise abatement

QuietFiber® Quiets Industrial Generator Noise at Santo Domingo Mall

Posted by Liz Ernst on Tue, May 15, 2012 @ 08:18 AM

Gernerator noise at Galleria 360 in Santo Domingo is quieted with QuietFiber sound absorption materialGenerator noise is quieted with QuietFiber sound absorption materialGenerator room at Galleria 360 in Santo Domingo is quieted with QuietFiber sound absorption material

Industrial noise pollution from back-up generators is a growing problem in the Dominican Republic and throughout the world. One generator designer installed QuietFiber noise absorbing material to lower the decibel levels at the newly constructed Galleria 360 mall in Santo Domingo.

SANTO DOMINGO, Dominican Republic, May 15, 2012 – Installation of 18,000 square feet of non-fiberlass QuietFiber® noise absorbing material has been completed in the massive generator room of the newly constructed, 750,000 square foot Galleria 360 mall in Santo Domingo.

QuietFiber, a product of Acoustiblok, Inc. in Tampa, Florida, was installed on the ceiling and walls of the mall’s generator and substation rooms. These rooms house the industrial emergency generators necessary to keep power running in this coastal area of the Caribbean, plagued by frequent power outages.

The Galleria 360’s industrial generators, installed by Santo Domingo-based Troncoso & Asociados, are a staple in this island republic. Edelca owner Carlos Montas, the Dominican Republic representative for Acoustiblok, Inc., consulted with Jay Boland of Acoustiblok, Inc. and recommended QuietFiber on the project after achieving excellent results with QuietFiber on a similar project at the La Sirena Superstore in the eastern coastal town of Higuey, Dominican Republic.

“Even though QuietFiber is not the least expensive product on the market, I keep coming back to it because the results beat all the competitors’ noise deadening products with double the noise insulating qualities,” Montas said. “The customer on this job wanted to install a double layer of a different product but I convinced him to try the QuietFiber.

“I’ve been designing and installing these emergency generators for 20 years, and I have never had the results from other noise abatement products that I have with QuietFiber, and now I’m trying to use it everywhere.”

Montas says noise from these industrial generators on which the island has become dependent in order to maintain consistent power is a major problem plaguing businesses and residential property owners when the generators are running.  Not only is generator noise bad for business, but its constant drone can cause permanent hearing loss. Another important consideration in the selection of soundproofing material is its fire resistance.

Recently in Santo Domingo a serious fire started in a generator room, and the existing foam sound proofing material was a prime contributor. The fire caused Montas to search for a new fireproof solution. QuietFiber is fire resistant even at 2,000 degrees.

“The noise levels are almost unbearable, so you need to have an adequate level of soundproofing in place when they are running,” Montas said. “I always install noise absorbing material wherever I install my generators, and QuietFiber is the best soundproofing product we’ve ever used.”

Montas and his crew were able to easily cut the QuietFiber to fit around electric conduits, and secured the material to the walls and ceiling with standard insulation stick pins.

The sound deadening qualities of QuietFiber will help to protect the mall’s employees, and streams of tourists and local residents from the high volume industrial noise caused by the generators when they are operating.

Lahnie Johnson, president and founder of Acoustiblok, Inc., says that the application of QuietFiber in the Galleria 360 generator and substation rooms was exactly what was needed for addressing the high decibel, reverberant sound emanating from the concrete walls.

“QuietFiber was designed with this type of hot, humid environment in mind,” Johnson said. “When you’re addressing solid surface noise issues, which in this case with concrete walls, you need a product with proven maximum sound absorption, high temperature rating for fire blocking, and hydrophobic (resistant to moisture).”

About QuietFiber

High sound absorbency QuietFiber is a two-inch thick interior/exterior noise solution that can also be cut to fit and simply hot glued underneath a bar, cabinets, countertops, tables, chairs, behind a wall tapestry or curtains. Slide a QuietFiber “pillow” on top of cabinets, or anywhere else that reverberant noise and echo is a problem.  Easily cut to size with a serrated knife, QuietFiber can be concealed almost anywhere.

Used industrially for reducing noise, QuietFiber is a material designed to absorb the maximum amount of sound (NRC 1.00). Fireproof, totally hydrophobic (will not absorb water or moisture), washable, non-deteriorating, mold and mildew-proof, Acoustiblok offers a lifetime warranty on this product.

QuietFiber® is used extensively for industrial noise reduction in large diesel generator rooms. It is also the answer to any space in need of a quick noise fix. QuietFiber is easy to install anywhere noise is a problem, without spending thousands of dollars to retrofit sound abatement material under drywall, or cover walls with expensive sound panels.

QuietFiber is UL fire rated for floor, wall and ceiling applications, 100 percent recyclable and 100-percent made in the USA.

For more information on QuietFiber, visit the Acoustiblok website (www.acoustiblok.com), send an E-mail (sales@acoustiblok.com), or call 813.980.1400.

###

PRESS RELEASE

Download PDF
For Immediate Relase
Contact: Liz Ernst, Director of Public Relations
Lizernst@acoustiblok.com
813.980.1400 x 210

Tags: noise absorbing material, industrial generator noise, soundproofing, industrial noise, Noise pollution, noise abatement, HVAC noise

QuietFiber Sound Absorbing Material Becomes Art in Home Theater

Posted by Liz Ernst on Tue, May 15, 2012 @ 08:00 AM

QuietFiber sound absorption material is painted to create soundproofing artQuietFiber sound absorption material painted to represent Pulp FictionQuietFiber sound absorption material is painted to create soundproofing art

ASPEN, Colorado, May 9, 2012 –Decorative artist Bryan Melillo and his partner  Bruce Czopek of  Interior Art Design - MelilloCzopek Artisans, have created classic movie poster-inspired artwork in an upscale Lake Tahoe residential home theater with QuietFiber®, a noise absorbing material from Tampa, Florida-based Acoustiblok, Inc. used to absorb reverberant noise in acoustically sensitive spaces, such as this state-of-the-art home theater.

When Lake Tahoe Architect and Designer Craig Bonds designed the home theater in the private residence, he framed and hung the 4 foot x 4 foot pieces of QuietFiber to provide the acoustic treatment desired within the space, while maintaining its minimalist design. Once hung, however, Bonds was less than thrilled with the bland result, which resembled “framed white paper,”

Bonds called in Melillo and Czopek, and asked the artists to create some space-appropriate artwork with the already-framed acoustical material, and what they came up with surprised everyone: four vivid movie poster-style pieces that add color and texture to the space and reflect a bit of the homeowner’s taste in films, sketched and painted directly onto the QuietFiber – no canvass necessary.

“We wanted to be careful not to interfere with the acoustical properties of the QuietFiber, so we just used charcoal pencils, colored pencils and small amounts of acrylic paint to get the authentic movie poster look we were after,” Melillo said.

The artists also used tiny amounts of water with the colored pencils to create a bit of a water color effect in some places, with spot-on results.

“Bruce and I have never worked on a project like this before, so we approached it cautiously using mostly water-based mediums on the QuietFiber. It worked beautifully, and we are excited about the thought of doing more of these for home theater spaces in the future.”

QuietFiber, which can be hung on any wall or hidden underneath curtains, tapestries, on top of shelves or tabletops to provide noise absorption in spaces susceptible to reverberant noise has. QuietFiber has been used decoratively in clubs, restaurants, private residences and other spaces in need of a sound abatement solution that worked with the space’s existing décor. By cutting the QuietFiber to the appropriate wall size and then covering it with fabric to coordinate with the space’s existing décor, QuietFiber instantly doubles as a sound deadening treatment and wall art.

The four completed QuietFiber art pieces include scenes from the movies “Pulp Fiction,” “The Guns of Navarone,” “The Last of the Mohicans” and “Cheech and Chong’s Up in Smoke,” at the request of the homeowner.

“We can create these QueitFiber art pieces for any movie the client would like,” Melillo said. “I think these are a great alternative to boring sound panels.

“Who wouldn’t rather have authentic-looking movie posters in fine art form doubling as acoustic panels in their space?”

Acoustiblok Founder and President Lahnie Johnson says the QuietFiber-as-art concept is one he has been working to make available since launching QuietFiber in 2011.

“We launched our QuietFiber material with this type of application in mind,” Johnson said. “When you’re addressing solid surface noise issues in well-appointed residences or businesses like this magnificent Lake Tahoe residence, you can’t hang ordinary sound abatement products because, although they serve a functional purpose, they aren’t necessarily going to look good in the space.

“QuietFiber is the only sound damping product on the market that can be directly painted or airbrushed on to create a complementary design element in any space. You have the sound abatement properties you need, in a product that can be completely disguised as an artistic element within the space.”

High sound absorbency QuietFiber is a two-inch thick interior/exterior noise solution that can also be cut to fit and simply hot glued underneath a bar, cabinets, countertops, tables, chairs, behind a wall tapestry or curtains. Slide a QuietFiber “pillow” on top of cabinets, or anywhere else that reverberant noise and echo is a problem.  Easily cut to size with a serrated knife, QuietFiber can be concealed almost anywhere.

Used industrially for reducing noise, QuietFiber is a material designed to absorb the maximum amount of sound (NRC 1.00). Fireproof, totally hydrophobic (will not absorb water or moisture), washable, non-deteriorating, mold and mildew-proof, Acoustiblok offers a lifetime warranty on this product.

QuietFiber® is used extensively for industrial noise reduction in large diesel generator rooms. It is also the answer to any space in need of a quick noise fix. QuietFiber is easy to install anywhere noise is a problem, without spending thousands of dollars to retrofit sound abatement material under drywall, or cover walls with expensive sound panels.

QuietFiber is UL fire rated for floor, wall and ceiling applications, 100 percent recyclable and 100-percent made in the USA.

For more information on QuietFiber, visit the Acoustiblok website (www.acoustiblok.com), send an E-mail (sales@acoustiblok.com), or call 813.980.1400.

 ###

PRESS RELEASE

Download PDF
For Immediate Relase
Contact: Liz Ernst, Director of Public Relations
Lizernst@acoustiblok.com
813.980.1400 x 210

Tags: reverberant sound, sound absorbing art, noise abatement for home theater, noise absorbing art, noise, home theater noise, sound absorbing material

Acoustiblok Creates Damped, Expandable Acoustical Envelope in New York ITB Recording Studio

Posted by Liz Ernst on Thu, May 3, 2012 @ 08:18 AM

acoustiblok soundproofing material installed in recording studiorecording studio with acoustiblok soundproofing material

MEDFORD, New York, May 2, 2012 – Acoustiblok noise abatement material was installed in the nearly completed Artist Workshop Studios recording facility, an in-the-box (ITB) studio designed and built by Artist Workshop Studios owner Tom Donofrio.  Acoustiblok was chosen to provide a sound barrier for the small, 12 foot x 12 foot basement studio that could drop decibels levels within the space and provide a neutral acoustical environment for recording.

Donofrio, an electrical engineer, and musician who has built recording studios in the past using different sound deadening materials, chose Acoustiblok for his newest project after consulting with Marilyn Myers of Acoustiblok, Inc., because of its sound damping and noise blocking qualities, as well as its thin, flexible structure that adds no volume to walls within the studio space. Attached to the studs before drywall is hung, Acoustiblok performs without the need to add layers of rigid drywall or modified drywall, a method Donofrio used in the past with mixed results and significant floor space reduction.

“I was looking for a product that would lower the decibels in the studio without taking up any additional space,” Donofrio said. “I was able to achieve the neutral acoustics desired in the space, which makes me extremely happy.

“I didn’t want a sound quality that was too dead or too live, so the Acoustiblok turned out to be an excellent choice.”

Donofrio and a friend were able to hang the 3mm Acoustiblok on the newly framed stud walls within the studio space, including cutouts around a window and electric sockets, and seal the seams according to installation recommendations, all in less than four hours.

The Artist Workshop Studios recording space was built for Donofrio to indulge his own talents as an acoustical guitarist and vocalist, and to be made available to artists on a budget who need an affordable studio with high quality production equipment and the expertise of a seasoned technician to record a song or album.

“Acoustiblok is a perfect choice for establishing sound quality within a sound recording studio like this one,” said Lahnie Johnson, president and founder of Acoustiblok, Inc.

“Unlike additional drywall or other solid rigid materials used for sound reduction, the 1/8-inch heavy, limp Acoustiblok allows the room to be a damped, expandable acoustical envelope. As such, a studio or home theater has less reflection and actually sounds significantly better.”

For more information, visit the Acoustiblok website or email sales@acoustiblok.com.

About Acoustiblok:   

Acoustiblok, Inc., a NASA spin-off company, has been providing high quality noise abatement products since 1998, earning the industry’s highest ratings from architects, builders, and consumers. Acoustiblok is a proprietary viscoelastic polymer material with a high density mineral content, heavy and yet extremely flexible. As sound waves cause the Acoustiblok material to flex, internal friction occurs and the acoustical energy is transformed into immeasurable trace amounts of heat (adiabatic).

Just one, 1/8-inch layer of Acoustiblok in a standard wall can result in more sound reduction than 12-inches of poured concrete. Environmentally friendly, Acoustiblok contains no lead, barium, or asbestos, is UV resistant and impervious to water and mold; it is UL rated and classified in the US and Canada (CUL) for virtually all wall, floor, and ceiling installations.

For more information, visit the Acoustiblok website, Email sales@acoustiblok.com, or call 813.980.1400.


###

PRESS RELEASE

Download PDF
For Immediate Relase
Contact: Liz Ernst, Director of Public Relations
Lizernst@acoustiblok.com
813.980.1400 x 210

Tags: recording studio soundproofing, Expandable acoustical envelope, sound insulating material, recording studio, noise abatement, absorbing sound, noise barrier