Acoustiblok Press Release Content

Acoustiblok Exhibits Products at POWER-GEN International 2012

Posted by Thomas Wiseman on Thu, Dec 13, 2012 @ 01:05 PM

power gen exibit hall 2012acoustiblok soundproofing power gen booth 2012 1

ORLANDO, FL, December 13, 2012 - Acoustiblok exhibited the company’s line of sound reduction materials this week at the 2012 POWER-GEN International Show being held in Orlando, FL on December 11-13, 2012.

POWER-GEN International is the industry leader in providing comprehensive coverage of the trends, technologies and issues facing the generation sector. More than 1,200 companies from all sectors of the industry exhibit each year to benefit from the exposure to 20,000 attendees. Displaying a wide variety of products and services, POWER-GEN International represents a horizontal look at the industry with key emphasis on new solutions and innovations for the future.

Generator noise is a growing problem everywhere, especially in residential neighborhoods, where multiple units can be running at once after a storm or power outage.  This is the type of noise that contributes to noise pollution and the health risks that go along with it. People are becoming more proactive about creating a quiet environment, especially at home.

Acoustiblok All Weather Sound Panels® are engineered specifically to withstand the most rigorous outdoor and industrial environments. Water, moisture, humid salt air or salt water, dirt, dust, constant ultraviolet light, chlorine air, grease, corrosion, and most harsh chemicals are not a problem for this wonderful product. The hurricane All Weather Sound Panel is tested to withstand wind load more than 270 MPH. 

Acousitblok’s QuietFiber® is the answer to any space in need of a noise fix that is easy to install anywhere noise is a problem, without spending thousands of dollars to retrofit sound abatement material under drywall, or cover walls with expensive sound panels.

Acoustiblok’s QuietFiber® is UL fire rated for floor, wall and ceiling applications, a significant safety factor when compared to common insulating materials – usually highly flammable -- often used in an attempt to reduce sound.

acoustiblok soundproofing power gen booth 2012 2Acoustiblok sound reduction material is made of a 1/8-inch (3 mm) thick proprietary viscoelastic polymer material with a high-density, non-barium mineral content, heavy yet extremely flexible. It is easily cut to fit with a utility knife, which makes it customizable to fit around pipes and other fixtures. Just one thin layer of Acoustiblok added to a standard metal or wood stud wall will result in more sound reduction - and provide more privacy - than 12-inches (30.5 cm) of poured concrete.

Get more information on some of Acousitblok’s generator-related projects here.

About Acoustiblok All Weather Sound Panels®:

Acoustiblok, a NASA “Spin-off” company, developed the All Weather Sound Panels, engineered specifically to withstand the most rigorous outdoor and industrial environments. Water, moisture, humid salt air or salt water, dirt, dust, UV, chlorine air, corrosion, and most harsh chemicals do not affect them. The industrial sound panels are available with an acoustically transparent five micron stainless steel dust filter for outdoor use in the world’s toughest environments, from the mining industry to the desert areas of the Middle East, and other applications where dust is a concern. Acoustiblok sound panels are extremely durable and are currently in use by the United States Army in the Middle East.

acoustiblok soundproofing power gen booth 2012 3Washable, durable, long lasting and usable in hundreds of areas and applications, the Acoustiblok All Weather Sound Panels are not just "sound absorbing" but also "sound blocking." This allows the panel to not only absorb sound but also stop the sound from penetrating through the panel, a very meaningful advantage over conventional "sound absorbing" panels that stop sound reflections but are poor sound barriers.  

With an unprecedented noise reduction coefficient (NRC) of 1.00 (Riverbank Acoustical Laboratories test results), they are the only noise barrier wind-load tested to 270 mph. Rigid and self-supporting, they can be used like building blocks to permanently or temporarily enclose any noise source, such as chillers and industrial machinery.

###

PRESS RELEASE

Download PDF

For Immediate Relase
Contact: Thomas Wiseman, Director of Public Relations
twiseman@acoustiblok.com
phone:  813.980.1400 Ext. 210  

Tags: POWER-GEN, soundproofing, industrial noise, Noise pollution, noise abatement, noise insulating material, generator noise, HVAC noise, industrial noise pollution, sound panels, trade show

All Weather Sound Panels® Resolve Generator Noise at LDS Temple

Posted by Liz Ernst on Wed, Oct 31, 2012 @ 11:55 AM

AWS Panels at LDS Temple AWS Panels LDS Temple LDSPanels7

VANCOUVER, BC, October 22, 2012 – Raicor Contracting, Ltd. earned the Northwest Wall & Ceiling Bureau’s Outstanding Project of the Year 2012 award for the visually spectacular LDS Temple located about 50 miles southeast of Vancouver in Langley, BC.  Included in the project’s flawless design are Acoustiblok’s All Weather Sound Panels, custom fit to create a clean, architecturally attractive noise barrier for the Temple’s roofless ancillary building that houses an industrial generator and HVAC systems.

Project Manager Timo Orava of Raicor worked with acoustic specialist Steve Hibbens, who recommended the All Weather Sound Panels for the project. Not only did the Temple officials want the noise reduced for Church members to worship in peace and quiet, the solution had to offer a clean, architecturally attractive appearance in keeping with the meticulously designed interior.

The LDS Temple which was built in the spirit of Solomon’s Temple of the Old Testament, according to Orava. Extreme care was taken not only in the design, but in the execution, which took more than three years to complete.

“The LDS Temple is an inspiring monument that Church leaders wanted built to perfection, right down to the very last detail,” Orava says. “It’s a visually stunning structure built to last, ideally, for hundreds of years.

“Church leaders’ interest was in getting a completed structure that is pleasing to God’s eye, and nothing less would suffice.”

The project was challenging for Orava’s team at Raicor because of the extremely high building standards in place, and the Temple leaders’ meticulous requirements. With a zero-tolerance for deficiencies, from the drywall to the wall sconces, the project demanded faultless workmanship. Orava said the Acoustiblok All Weather Sound Panels were no exception, and needed to fit exacting specifications in the structure.

“One-eighth of an inch off anywhere, and they would not have fit,” he said. “But the Acoustiblok team custom cut and finished each panel to the exact dimensions, and they all fit together flawlessly.”

Nineteen standard 4 foot x 8 foot panels and 13 custom sized panels were used to create the precision noise barrier that Temple leaders wanted; clean, aesthetically pleasing, and most important, effective.

“After the panels went in, the noise issue was resolved, which was surprising because the building that houses this noisy industrial equipment has no roof,” Orava says. “The noise is no longer a problem.”

Acoustiblok President and Founder Lahnie Johnson says the All Weather Sound Panels  are different from other conventional sound panels. In addition to being able to stand up to the most extreme environments, they not only absorb virtually all sound but they also contain a layer of Acoustiblok material which provides exceptional noise blockage.

The sound absorbency of the panel brings down substantially the acoustical energy around the generator and chiller by eliminating all sound reflections in the area, while the Acoustiblok material in the panel allows it to also be an excellent sound barrier. These qualities make the All Weather Sound Panels a perfect fit for the LDS Temple, where they will perform at their full potential in the Northwest Canadian environment.

“Vancouver experiences some real weather extremes, which these panels are built for,” Johnson says.

“In addition, when they are worked into an architectural design with this kind of precision and attention to detail, they offer an enhanced aesthetic when appearance is important, as it was here.”

For more information visit the Acoustiblok website (www.acoustiblok.com), Email (sales@acoustiblok.com), or call 813.980.1400.

About Acoustiblok All Weather Sound Panels®:

Acoustiblok, a NASA “Spin-off” company, developed the All Weather Sound Panels, engineered specifically to withstand the most rigorous outdoor and industrial environments. Water, moisture, humid salt air or salt water, dirt, dust, UV, chlorine air, corrosion, and most harsh chemicals do not affect them. The industrial sound panels are available with an acoustically transparent five micron stainless steel dust filter for outdoor use in the world’s toughest environments, from the mining industry to the desert areas of the Middle East, and other applications where dust is a concern. Acoustiblok sound panels are extremely durable and are currently in use by the United States Army in the Middle East.

Washable, durable, long lasting and usable in hundreds of areas and applications, the Acoustiblok All Weather Sound Panels are not just "sound absorbing" but also "sound blocking." This allows the panel to not only absorb sound but also stop the sound from penetrating through the panel, a very meaningful advantage over conventional "sound absorbing" panels that stop sound reflections but are poor sound barriers.  

With an unprecedented noise reduction coefficient (NRC) of 1.00 (Riverbank Acoustical Laboratories test results), they are the only noise barrier wind-load tested to 270 mph. Rigid and self-supporting, they can be used like building blocks to permanently or temporarily enclose any noise source, such as chillers and industrial machinery.

###

PRESS RELEASE

Download PDF

For Immediate Relase
Thomas Wiseman, Director of Public Relations
twiseman@acoustiblok.com
813.980.1400 Ext. 2109

Tags: All Weather Sound Panels, outdoor soundproofing, outdoor noise, soundproofing, industrial noise, Noise pollution, noise abatement, noise insulating material, generator noise, HVAC noise, industrial noise pollution, sound panels

Acoustiblok Names Carlos Montas Dominican Republic Manufacturing Rep

Posted by Liz Ernst on Tue, Oct 2, 2012 @ 08:44 AM

Carlos Montas

TAMPA, Florida, September 27, 2012 – Acoustiblok, Inc. Founder and President Lahnie Johnson this week approved a working agreement with Carlos Montas as Acoustiblok’s manufacturing representative in the Dominican Republic. Montas, Engineering Manager of Electicidad del Caribe SRL (EDELCA) in Santo Domingo, will represent Acoustiblok sound abatement products throughout the Dominican Republic.

Montas, a native of the Dominican Republic, is a 2005 graduate of Instituto Tecnológico de Santo Domingo (INTEC). He has built a career in the design, installation, and supervision of emergency generator systems in the industrial and commercial communities throughout the Caribbean.  He was first introduced to Acoustiblok products after installing QuietFiber noise absorbing material in one of EDELCA’s massive generator system projects to dramatically lessen the impact of the high decibel generator noise outside the generator facility.

With years of experience designing and installing his trademark generator systems, Montas understands the importance of installing noise absorbing material in every generator room and outbuilding he designs, since the noise can be intolerable and pose a real problem for businesses, residents, and visitors.

“Noise levels from the generators are almost unbearable, so you need to have some layer of soundproofing in place when they are running,” Montas said. “When we first installed QuietFiber in a generator room, I knew right away it was the best soundproofing product I had ever used, and I’ve used no other sound absorbing material since.”

EDELCA is a leader in the installation of emergency generation systems in the Dominican Republic and throughout the Caribbean, where tropical storms and weather events are a source of frequent power outages, making emergency generators a necessity for businesses to function smoothly.  As an authorized dealer of QuietFiber and other Acoustiblok noise deadening products, Montas offers first-hand experience and a seasoned understanding of how to solve noise issues from a variety of sources, including one of the toughest – industrial generators.

“Carlos Montas is a highly knowledgeable and sought after emergency systems engineer in a high-demand environment,” Johnson says. “I am convinced that we could have no better representative for Acoustiblok products in the Caribbean, given his extensive experience and comprehensive understanding of the region’s distinct noise abatement needs.

“His expertise and his work in the Dominican Republic and throughout the Caribbean make the alliance particularly satisfying, a perfect fit with Acoustiblok’s expansion into the Dominican Republic.”

For more information on Acoustiblok products, visit the Acoustiblok website, Email emontas@edelca.com.do , or call 809-596-8290.

About Acoustiblok:

Acoustiblok, Inc., a NASA spin-off company, has been providing high quality noise abatement products since 1998, earning the industry’s highest ratings from architects, builders, and consumers. Acoustiblok is a proprietary viscoelastic polymer material with a high density mineral content, heavy and yet extremely flexible. As sound waves cause the Acoustiblok material to flex, internal friction occurs and the acoustical energy is transformed into inaudible trace amounts of heat (adiabatic).

Just one, 1/8-inch layer of Acoustiblok in a standard wall can result in more sound reduction than 12-inches of poured concrete. Environmentally friendly, Acoustiblok contains no lead, barium, or asbestos, is UV resistant and impervious to water and mold; it is UL rated and classified in the US and Canada (CUL) for virtually all wall, floor, and ceiling installations. For more information, visit the Acoustiblok website, Email sales@acoustiblok.com, or call 813-980-1400.

###

PRESS RELEASE

Download PDF

For Immediate Relase
Contact: Liz Ernst, Director of Public Relations
Lizernst@acoustiblok.com
813.980.1400

Tags: soundproofing, industrial noise, Noise pollution, noise abatement, sound abatement, noise barrier, generator noise, HVAC noise, industrial noise pollution

Chiller Noise No Longer Problem After Acoustifence Barrier Installed

Posted by Liz Ernst on Mon, Apr 30, 2012 @ 05:56 PM

industrial chiller noise quieted with Acoustifence noise barrier materialQuietFiber absorption material covered by aluminum perf helps to quiet industrial chiller noise

(L) A 24 foot tall, three sided Acoustifence barrier was installed around the industrial chiller on an existing chain link fence. (R) The top 10 feet of the adjacent Festival Foods warehouse-sized store is treated with QuietFiber to prevent sound reflection over the top of the chiller barrier.

SHEBOYGEN, Wisconsin, April 30, 2012 – Installation of a 24-foot noise barrier utilizing Acoustifence outdoor sound abatement material at the new Sheboygan Festival Foods store is complete, ending complaints from nearby residents over extreme levels of noise leaking from the store’s industrial refrigeration chillers into the community.

Folks in Sheboygen were celebrating when the popular Wisconsin-based Festival Foods grocery chain opened the 70,000 square foot mega store here on September 16, 2011. Less than two weeks later, the community’s warm welcome had grown icy as neighbors began to complain about noise from the store’s industrial refrigeration chiller that was so loud, it violated the city’s noise ordinance.  

Festival Foods enlisted the help of Acoustical Engineer Eric Wolfram of Milwaukee-based Scott R. Riedel & Associates, LTD, who consulted with Acoustiblok’s Jay Boland to choose Acoustifence noise barrier material, a product of Acoustiblok, Inc. of Tampa Florida, to bring the decibel level down below the legal threshold and restore peace and quiet to the neighboring community.

When Wolfram first investigated the site in September, decibel readings ranged between 78.4 and 90.7, loud enough to be a risk for noise-related health problems to nearby residents and workers, had they been subjected to the noise over time. The Sheboygan Department of City Development demanded the level be reduced by at least five decibels, Wolfram said.

“The existing refrigeration pump and motor systems produce extreme noise levels,” Wolfram said. “This noise reverberates within the sheet-metal paneled enclosure interior and escapes through several different exhaust and ventilation openings.

“Additional noise was generated by the cooling and exhaust fans mounted above the enclosure.”

Working with sound consultants from Acoustiblok, Inc., Wolfram designed a two-step solution, creating a barrier with Acoustifence noise deadening material to block noise around the massive system, and incorporating another Acoustiblok product, QuietFiber, to help reduce sound from reflecting off of the taller adjacent building behind the chillers.

Minimal structural changes were required, as the ⅛- inch Acoustifence was easily attached to an existing chain link fence and the outdoor-rated QuietFiber with a perforated metal cover was capconed to the building.

The results were better than Wolfram had hoped, with decibel levels reduced to 57.3 the moment the barrier was in place – well below the City’s legal threshold, and more than 20 decibels lower than before the Acoustiblok products were installed. Neighbors are no longer bombarded with the irritating chiller noise, now replaced with the ordinary ambient sounds that existed before.

Sounds from local traffic and roadways exceeded that of the compressor equipment after installation of the Acoustifence and QuietFiber products,” Wolfram said.

Lahnie Johnson, founder and president of Acoustiblok, Inc., applauded Festival Foods’ quick action in addressing the noise complaints right away, stating that the product combination was the perfect solution for this particular type of noise challenge.

“The Acoustifence and QuietFIber treatments were the perfect solution for the Festival Foods chiller noise, as both of these materials are designed to hold up in inclement weather, and as you can see from the results, they do their job well beyond everyone’s expectations,” Johnson said. “The Acoustifence and Quiet Fiber are also substantially less costly than attempting a structural enclosure solution.”

For more information on industrial noise solutions, visit the Acoustiblok website, Email sales@acoustiblok.com, or call 813-980-1400.

###

About Acoustiblok: 

Acoustiblok, Inc., a NASA spin-off company, has been providing high quality noise abatement products since 1998, earning the industry’s highest ratings from architects, builders, and consumers. Acoustiblok is a proprietary viscoelastic polymer material with a high density mineral content, heavy and yet extremely flexible. As sound waves cause the Acoustiblok material to flex, internal friction occurs and the acoustical energy is transformed into immeasurable trace amounts of heat (adiabatic).

Just one, 1/8 inch layer of Acoustiblok in a standard wall can result in more sound reduction than 12-inches of poured concrete. Environmentally friendly, Acoustiblok contains no lead, barium, or asbestos, is UV resistant and impervious to water and mold; it is UL rated and classified in the US and Canada (CUL) for virtually all wall, floor, and ceiling installations.

PRESS RELEASE

Download PDF
For Immediate Relase
Contact: Liz Ernst, Director of Public Relations
Lizernst@acoustiblok.com
813.980.1400 x 210



Tags: chiller noise, sound barrier, soundproofing, noise barrier, noise insulating material, HVAC noise, industrial noise pollution, industrial fan noise, industrial chiller noise

Noise from Palm Beach County Water Treatment Plant Silenced With Acoustiblok “Hurricane” All Weather Sound Panels®

Posted by Liz Ernst on Thu, Mar 1, 2012 @ 03:59 PM

All Weather Sound Panels quiet water treatment plantnoise is bocked and absorbs with Acoustiblok All Weather Sound Panels at a water treatment facilityAll Weather Sound Panels surround water treatmen facility blocking noise

MANALAPAN, Florida, March 1, 2012 – Installation of Acoustiblok® “Hurricane” All Weather Sound Panels at a water treatment plant in the Manalapan-Hypoluxo island community of West Palm Beach is complete, ending an almost year-long battle to quiet noise that was bleeding from the plant into residential areas of the tiny island community.

In March, 2011 residents of the secluded community, tucked between the Atlantic Ocean and the Intracoastal Waterway in Palm Beach County, began complaining about noise from the island’s water treatment plant that was disrupting their tranquil setting. Town officials at first requested the plant be enclosed, but later deemed enclosure impractical and requested other options that would allow the sound insulating structure to be moved or removed, and would also allow easy access to the plant equipment for maintenance and repairs.

They eventually turned to Kurt King, an engineer with West Construction in nearby Lake Worth, to find a solution. King, an expert in creating noise barrier solutions for water treatment plants and other facilities with loud pumps, blowers, compressors, exhausts and industrial machinery, chose to install Acoustiblok’s Hurricane All Weather Sound Panels at the Manalapan Water Treatment facility.

“The kind of equipment used at a water treatment plant can be quite loud,” King said. “In this case, the noise was coming from two sites and bleeding into the adjoining neighborhood.”

Noise at the water treatment plant stemmed from a stand-alone pump station and a separate station with a blower and vacuum pump intake/exhaust, scrubber exhausts, compressors, vents and blow-downs.

With the help of Acoustiblok consultant Marilyn Myers, King designed an assembly of nine Acoustiblok Hurricane All Weather Sound Panels to place around the noisy pump station, and a 14-panel assembly around the exhaust blower site, using a combination of 4 foot x 8 foot and 4 foot x 10 foot panels.  Immediately upon installation, King said the decibel levels were reduced by 70 percent or more.

“In my opinion they worked very well,” King said. “The architect and property owners were very pleased, and the panels suited this job because they are engineered specifically to withstand outdoor elements in some rough weather areas like this one directly on the Atlantic shoreline.”

Lahnie Johnson, founder and president of Acoustiblok, Inc., said the Hurricane model of the company’s All Weather Sound Panel was specifically designed for settings like this one on the Manalapan-Hypoluxo island.

“The decision to use Acoustiblok All Weather Hurricane Panels to reduce the industrial noise from this water treatment plant was a win-win for everyone,” Johnson said.

“Whenever you have high maintenance equipment like this, you need sound barriers that allow for easy access to it, and you need a solution that can withstand the high winds, humidity, salt air, dirt, dust, sand and other elements that are unavoidable in an oceanfront environment.

“Extreme dust conditions can disable conventional sound absorbing systems, while these panels are engineered to perform as well in the worst conditions as they do under calm conditions; and since they both block noise and absorb it, you could not have found a more all-inclusive solution to this community’s noise problem,” Johnson said.

About Acoustiblok “Hurricane” All Weather Sound Panels:

Acoustiblok, a NASA “Spin-off” company, developed the Hurricane All Weather Sound Panels, engineered specifically to withstand the most rigorous outdoor and industrial environments. Water, moisture, humid salt air or salt water, dirt, dust, UV, chlorine air, corrosion, and most harsh chemicals do not affect them. The industrial Hurricane panels are available with an acoustically transparent five milron stainless steel dust filter for outdoor use in the world’s toughest environments, from the mining industry to the desert areas of the Middle East, and other applications where dust is a concern. Acoustiblok sound panels are extremely durable and are currently in use by the United States Army in the Middle East.

Washable, durable, long lasting and usable in hundreds of areas and applications, the Acoustiblok “Hurricane” All Weather Sound Panels are not just "sound absorbing" but also "sound blocking." This allows the panel to not only absorb sound but also stop the sound from penetrating through the panel, a very meaningful advantage over conventional "sound absorbing" panels that stop sound reflections but are poor sound barriers.  

With an unprecedented noise reduction coefficient (NRC) of 1.00 (Riverbank Acoustical Laboratories test results), they are the only noise barrier wind-load tested to 270 mph. Rigid and self-supporting, they can be used like building blocks to permanently or temporarily enclose any noise source, such as chillers and industrial machinery.

For more information or to view a video demonstration of Acoustiblok’s sound deadening capabilities, visit the Acoustiblok website, Email sales@acoustiblok.com, or call 813.980.1400.

                                                         ###

PRESS RELEASE

Download PDF
For Immediate Release
Contact: Liz Ernst, Director of Public Relations
Lizernst@acoustiblok.com
813.980.1400 x 210

Tags: noise absorbing material, noise deadening, sound barrier, soundproofing, industrial noise, noise barrier, generator noise, HVAC noise, industrial noise pollution

QuietFiber® Used to Quiet Industrial Generator Noise at La Sirena

Posted by Liz Ernst on Fri, Jan 6, 2012 @ 12:35 PM

industrial generator quieted with QuietFiber sound absorption materialindustrial generator quieted with QuietFiber sound absorption materialindustrial generator quieted with QuietFiber sound absorption material

Power outages are a common occurrence in the Dominican Republic, and industrial noise pollution from emergency generators is a growing concern. One DC generator designer is using QuietFiber noise absorbing material to lower the decibel levels at the La Serena superstore in Higuey.

HIGUEY, Dominican Republic, January 3, 2011 – Installation of QuietFiber® noise absorbing material has been completed in the massive generator room of the newly constructed La Sirena superstore in the eastern coastal town of Higuey, Dominican Republic.

QuietFiber, a product of Acoustiblok, Inc. in Tampa, Florida, was installed on the ceiling and walls of the store’s industrial power systems room that houses the massive emergency generators necessary to keep power running in this coastal area of the Caribbean, plagued by frequent power outages.

The industrial generators, designed and installed by Santo Domingo-based Edelca, are a staple in this island republic. Carlos Montas, Edelca owner and Acoustiblok representative in the Dominican Republic, used QuietFiber for the first time at the recommendation of acoustical specialist Jay Boland of Acoustiblok, on the La Sirena project. Montas, who has been installing his trademark "industrial art" generator systems – known for their bold colors and clean, modern, high gloss appearance — for more than 20 years, says noise from these generators is a major problem plaguing businesses and residential property owners when the generators are running.

“The noise levels are almost unbearable, so you need to have some level of soundproofing in place when they are running,” Montas said. “I always install noise absorbing material wherever I install my generators, and QuietFiber is the best soundproofing product we’ve ever used.”

Montas and his crew were able to easily cut the QuietFiber to fit around electric conduits, and secured the material to the walls and ceiling with standard insulation stick pins.  

The La Sirena chain of Wal-Mart-size shopping warehouses dotting the eastern coast of the Dominican Republic provide one-stop shopping for locals and tourists.  The sound deadening qualities of QuietFiber will help to protect the store’s 300-plus employees, and countless tourists and local residents from the high volume industrial noise caused by the generators when they are operating.

“The product is great, more than I had hoped for,” Montas said. “We plan on using QuietFiber on all our future projects as well, we’re that happy with it.”

Lahnie Johnson, president and founder of Acoustiblok, Inc., said that the application of QuietFiber in the La Sirena structure was perfect for addressing the high decibel, reverberant sound emanating from the concrete-walled generator room.

“QuietFiber was designed with this type of environment in mind,” Johnson said. “When you’re addressing solid surface noise issues, which in this case is the concrete walls, you need a product with proven sound absorption qualities.

Used industrially for reducing noise, QuietFiber is a material designed to absorb the maximum amount of sound (NRC 1.00). Fireproof, totally hydrophobic (will not absorb water or moisture), washable, non-deteriorating, mold and mildew-proof, Acoustiblok offers a lifetime warranty on this product.

QuietFiber® is the answer to any space in need of a noise fix that is easy to install anywhere noise is a problem, without spending thousands of dollars to retrofit sound abatement material under drywall, or cover walls with expensive sound panels.

QuietFiber is UL fire rated for floor, wall and ceiling applications, a significant safety factor when compared to common insulating materials – usually highly flammable -- often used in an attempt to reduce sound.

QuietFiber is also 100 percent recyclable, and 100-percent made in the USA.

For more information on QuietFiber, visit the Acoustiblok website (www.acoustiblok.com), send an E-mail (sales@acoustiblok.com), or call 813.980.1400.

###

PRESS RELEASE

Download PDF
For Immediate Release
Contact: Liz Ernst, Director of Public Relations
Lizernst@acoustiblok.com
813.980.1400 x 210

Tags: noise absorbing material, noise deadening, sound barrier, soundproofing, industrial noise, noise barrier, generator noise, HVAC noise, industrial noise pollution

Acoustiblok, Inc. Launches Quiet-Cloud® Industrial Sound Absorbing Panels

Posted by Liz Ernst on Wed, Nov 30, 2011 @ 10:23 AM

Quiet-Cloud industrial sound panel   Quiet-Cloud industrial sound panelQuiet-Cloud industrial sound panel

TAMPA, Florida, November 30, 2011 – Acoustiblok, Inc., a NASA spinoff company, this week announced its launch of Quiet-Cloud, the newest product in its arsenal of sound abatement products developed to combat noise pollution and avoid costly OSHA penalties.

Specifically designed to address serious noise levels common in industrial settings, the 4-foot by 8-foot Quiet-Cloud sound absorbing panels absorb more than twice the amount of noise that conventional panels take in, and at the same time block noise within the industrial plant environment. Quiet-Cloud provides maximum noise absorption and the highest NRC ratings attainable.

A lightweight, easily moveable panel that, when properly staggered can increase the perimeter-to-surface absorption area up to five-fold, each Quiet-Cloud panel consists of a heavy gauge perforated aluminum casing over a hydrophobic, sound absorbing material that can withstand operating temperatures up to 1,000 degrees Fahrenheit.

In settings where finite dust particles are a consideration, Quiet-Cloud panels are available with a standard steel mesh micro filter.

Ordered to hang horizontally or vertically, the washable Quiet-Cloud panels can also be easily installed in a standard ceiling tile grid.

Acoustiblok Founder and President Lahnie Johnson says the addition of Quiet-Cloud to the company’s growing catalog of soundproofing products affirms the company’s ongoing commitment to developing new ways to combat noise pollution.

“We are proud of our track record when it comes to addressing and reducing noise in a variety of settings,” Johnson said. “Unchecked industrial noise is hazardous to the hearing and health of workers and staff exposed to it every day, as well as those of us exposed to it in the course of our everyday lives.

“Noise in the workplace is frequently related to accidents and reduced productivity. Quiet-Cloud resolves industrial noise responsibly and affordably, and can be easily adapted to any setting.”

About Acoustiblok:

Acoustiblok’s high quality noise abatement products, available since 1998, have earned the industry’s highest ratings from architects, builders, and consumers. Acoustiblok is a proprietary viscoelastic polymer material with a high density mineral content, heavy and yet extremely flexible. As sound waves cause the Acoustiblok material to flex, internal friction occurs and the acoustical energy is transformed into undetectable trace amounts of heat.

Just one, 1/8 inch layer of Acoustiblok in a standard wall will result in more sound reduction than 12-inches of poured concrete. Environmentally friendly, Acoustiblok contains no lead, barium, or asbestos, is UV resistant and impervious to water and mold; it is UL rated and classified for all wall, floor, and ceiling installations.

For more information on Quiet-Cloud, visit the Acoustiblok website at www.acoustiblok.com, Email sales@acoustiblok.com, or call 813.980-1400.

###

 PRESS RELEASE

Download PDF
For Immediate Release
Contact: Liz Ernst, Director of Public Relations
Lizernst@acoustiblok.com
813.980.1400 x 210

Tags: industrial noise barrier, industrial noise absorbant, noise blocking, sound blocking, industrial noise, Noise pollution, sound abatement, industrial noise pollution